Miniprog C(RL78/R8C)

Gang Programmer
RENESAS GANG-PROGRAMMERS - Miniprog C(RL78/R8C)

The Renesas Gang Programmer-miniprog C is an RL78/R8C Family device programmer that can program a single device at a time. The Renesas Gang Programmer-miniprog C connects to a host PC using USB and provides flexible programming options that allow the user to fully customize the process.

The Renesas Gang Programmer-miniprog C provides an economical and reliable means of programming a wide range of RL78/R8C microcontroller units (MCUs). It is designed with a versatile hardware platform to support programming of different MCUs.

image gallery

1 / 3
2 / 3
3 / 3

The Renesas Gang Programmer-miniprog C can be used to program single devices by copying data held in an internal flash memory to the MCUs’ internal memory. Renesas Gang Programmer-miniprog C provides an RS232 communication port for interfacing and automating the production programming process. Renesas Gang Programmer-miniprog C works only with Crypto V500 or above software revisions.

TECHNICAL DETAILS

Miniprog software allows user to encrypt and download the hex-file from PC to Gang Programmer using USB connection. Only if the encryption key in programmer and key used for hex-file encryption matches then code will be successfully programmed. This help the user to share the hex-file (encrypted) with EMS provider as the encrypted hex file can be used only with the respective programmer. In addition to this Octoprog allows the user to set the number of targets to be programmed, once target count is reached programmer will wipe out its internal memory and won’t program any further targets.

The Miniprog Gang programmer is a RL78/R8C Family device programmer that can program up to four identical devices at the same time. The Gang Programmer connects to a host PC using USB and provides flexible programming options that allow the user to fully customize the process. It provides an economical and reliable means of programming a wide range of RL78/R8C microcontroller units (MCUs). It is designed with a versatile hardware platform to support programming of different MCUs. This can be used to program four devices simultaneously by copying data held in an internal flash memory to the MCUs’ internal memory.

logo
FEATURES
  • Multicolour Status LED
  • Range of RL78/R8C family of microcontroller units
  • Stand-alone Programming mode operation
  • One 14 pin FRC male connectors to accommodate MCU target.
  • Supports encryption of hex file with a 16-digit password key.
  • Data flash erase selection option while programming
logo